Component Inspection

Component Inspection

1. Check SMARTRA
1. IGN "ON" & Engine "OFF"
2. Neutralize "SMARTRA" and Register transponder key by scantool.

NOTE: Pin code is required to Neutralize SMARTRA and to Register transponder key

3. Are Neutralizing and Registering completed normally ?
YES
1) Perform all the key teaching procedure with scantool. (All the keys must be retaught) and then, go to "Verification of Vehicle Repair" Procedure.

NOTE: Never change the password after SMARTRA is neutralized with scantool Otherwise, Virgin TP only possible to register.

NO
1) Substitute with a known-good SMARTRA and check for proper operation.
If the problem is corrected, replace SMARTRA and then go to "Verification of Vehicle Repair" procedure.