General Information

Component Location





General Description

CAN communication is a parallel circuit to interchange information among each units. CAN communication can share much information with units more faster and more efficiently by using specified language.
CAN-High line is twisted with CAN-Low line as a purpose in preventing from a noise.
The operating duty of EMC is maintained at 100 : 0 (2WD) for guaranteeing stabilized driving force, accuracy of the control during inside ABS, FTCS, ESP control.






DTC Description

This code related to communication line between ECM (PCM, ABS, ESP) and "4WD-ECM" is set when CAN signal from ECM (PCM, ABS, ESP) can't received for more than 1 sec or ECU internal error occur. If failure is detected "4WD-ECM" prohibits the "ITCC" control and cuts the current to control coil.

DTC Detecting Condition





Diagnostic Circuit





Signal Waveform




FIG. 1) CAN Signal : high & low