Removal

Removal

Oil pump
1. Drain engine oil.
2. Using the SST(09215-3C000) remove the lower oil pan(A).





NOTE:
Be careful not to damage the contact surfaces of upper oil pan and lower oil pan.

CAUTION:
- Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of 1 arrow.
- After tapping the SST with a plastic hammer along the direction of 2 arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
- Do not turn over the SST abruptly without tapping.
It can result in damage of the SST.

3. Remove the oil pump chain cover(A).




4. Remove the oil pump chain sprocket(A).




5. Remove the oil pump(A).





Oil Filter Assembly
1. Loosen the oil filter cap by turning it counterclockwise to drain oil in the oil filter.
2. Drain the engine coolant.
3. Disconnect the oil pressure switch connector.
4. Remove the surge tank and the intake manifold(A) with the delivery pipe assembly.




5. Disconnect the water hoses from ETC.
6. Remove the water temperature control assembly(A).




7. Disconnect the water vent hose(A).
8. Remove the oil filter body cover(B).




9. Remove the oil filter body.

NOTE:
Be careful of the knock sensor connector.