Verification of Vehicle Repair

Immobilizer

Immobilizer - P1610 Non-Immobilizer-EMS connected to an Immobilizer - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC
2. Operate the vehicle and monitor the DTC on the scantool
3. Are any DTCs present?
YES
1) Go to the applicable troubleshooting procedure
NO
1) System is performing to specification at this time.