Component Inspection

Immobilizer

Immobilizer - P1690 SMARTRA no response - Component Inspection

Component Inspection

1. Check SMARTRA
1. IGN "ON" & Engine "OFF"
2. Neutralize "SMARTRA" and Register transponder key by scantool.

NOTE:
Pin code is required to Neutralize SMARTRA and to Register transponder key

3. Are Neutralizing and Registering completed normally?
YES
1) Perform all the key teaching procedure with scantool. (All the keys must be retaught) and then, go to "Verification of Vehicle Repair" Procedure.

NOTE:
Never change the password after SMARTRA is neutralized with scantool Otherwise, Virgin TP only possible to register.

NO
1) Substitute with a known-good SMARTRA and check for proper operation.
If the problem is corrected, replace SMARTRA and then go to "Verification of Vehicle Repair" procedure.