Secondary Seat

Replacement

Secondary Seat (L/H)
1. Disconnect the seat assembly mounting cover (L).
2. Loosen the mounting bolt, then remove the rear seat assembly (K).




3. Installation is the reverse of removal.

NOTE:
- Set the seat into the floor properly.
Unbind the connecting band between the seat and slide buckle.
Tighten the bolt temporarily in the order E->D->C.
- Set the seat into the most rearward position. Assemble the H, I temporarily, then tighten the J completely.
And tighten the H, I completely.
- Tighten the bolt completely in the order C->D->E.
Assemble the front cover of the seat and buckle. Set the seat into the most rearward position.
- Assemble the track cover of the seat and buckle buckle check that the seat operates back and forth smoothly and the locking portion of seat locks properly. And then set the seat into the most rearward position.

Seat Cushion Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Disconnect the protector (A).




3. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




4. Installation is the reverse of removal.




5. Installation is the reverse of removal.

Secondary Seat (R/H)
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Remove the recliner cover (A).




3. Using a screwdriver, remove the recliner lever (A).




4. Remove the seat back panel (A).




5. Disconnect the protector (A).




6. Remove the headrest and headrest guide (A).




7. Remove the recliner lever (A) and recliner cover (B).




8. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




9. Installation is the reverse of removal.

Seat Cushion Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Disconnect the protector (A).




3. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




4. Installation is the reverse of removal.