Fuel Pump: Service and Repair

Removal

1. Preparation
(1) Remove the 2nd seat .
(2) Open the carpet for fuel pump (A).




(3) Remove the service cover of the fuel pump (A).




(4) Disconnect the fuel pump connector (A).




(5) Start the engine and wait until fuel in fuel line is exhausted.
(6) After engine stops, turn the ignition switch off.
2. Disconnect the fuel tank pressure sensor connector (A).




3. Disconnect the fuel feed tube quick-connector (B), the suction tube quick-connector (C), and the vacuum tube quick-connector (D).
4. Remove the fuel pump after unfastening the fuel pump installation bolts (E).






Installation

1. Install the fuel pump in according to the reverse order of "REMOVAL" procedure.

Fuel pump installation bolts :
2.0 - 2.7 Nm (0.2 - 0.3 kgf-m, 1.4 - 2.2 lbf-ft)