Glass Replacement

Replacement

Glass Replacement

NOTE:
- Put on gloves to protect your hands.

1. Remove the door belt weatherstrip.
2. Remove the delta cover (A).




3. Remove the door trim.
4. Release the rear channel (C) mounting bolt and nut.

CAUTION:
- Take care not to drop to glass and scratch the glass surface.

5. Disconnect the plug hole (B).
6. Carefully move the glass (A) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.




7. Installation is the reverse of removal.