Component Tests and General Diagnostics

Inspection

Antenna Actuation Diagnosis
1. Connect the cable of scan tool to the data link connector in driver side crash pad lower panel.
2. After IG ON, select the "ACTUATION TEST".




3. Set the smart key near the related antenna and operate it with a scanner.




4. If the LED of smart key is blinking, the smart key is normal.
5. If the LED of smart key is not blinking, check the voltage of smart key battery.
6. Antenna actuation
A. INTERIOR Antenna 1
B. INTERIOR Antenna 2
C. INTERIOR Antenna 3
D. BUMPER/ TAIL GATE Antenna
E. DRV_DR Antenna
F. AST_DR Antenna

Antenna Status Check
1. Connect the cable of scan tool to the data link connector in driver side crash pad lower panel.
2. Select the "07.Status Check".
3. After IG ON, select the "03.Antenna Status Check".




4. Set the smart key near the related antenna and operate it with a scanner.








5. If the smart key runs normal , the related antenna, smart key(transmission, reception)and exterior receiver are normal.
6. Antenna status
A. INTERIOR Antenna 1
B. INTERIOR Antenna 2
C. INTERIOR Antenna 3
D. BUMPER/ TAIL GATE Antenna
E. DRV_DR Antenna
F. AST_DR Antenna

Serial Communication Status Check
1. Connect the cable of scan tool to the data link connector in driver side crash pad lower panel.
2. Select the "Status Check".




3. After IG ON, select the "SRx COMM. LINE Status Check".




4. Check the serial communication line with a scanner.
5. If the smart key runs normal, the communication of smart key unit, exterior receiver and MSL(Mechatronic Steering column Lock) are normal.
6. If the smart key runs abnormal, check the following items.
A. Disconnection or no response of the exterior receiver communication line.
B. The exterior receiver communication line disconnection and ground connection.
C. The MSL disconnection or no response
D. The MSL disconnection and ground connection

Interior Antenna Actuation Check
1. Set the smart key in the following shade area and check the IG ON.




2. If the ignition is ON, the antenna runs normal.
3. Check the interior antenna ignition mode.
4. Set the smart key in the following shade area and actuate the antenna. Check the LED of smart key is blinking.




5. If the LED of smart key is not blinking, check the antenna in shade area.