Repair Procedures

Replacement

1. Discharge refrigerant from refrigeration system.
2. Replace faulty tube or hose.

CAUTION:
Cap the open fittings immediately to keep moisture or dirt out of the system.

3. Tighten joint of bolt or nut to specified torque.

CAUTION:
Connections should not be torque tighter than the specified torque.





4. Evacuate air in refrigeration system and charge system with refrigerant.

Specified amount: Front only : 700 ± 25g (1.54±0.05 lbs)
Front & rear : 900 ± 25g (1.98±0.05 lbs)


5. Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6. Inspect A/C operation.