Rear Wiper Motor

Removal

1. Detach the wiper cap, then remove the rear wiper arm (A) after removing a nut (B).




2. Remove the rear wiper cap & pad (B) after removing a HEX nut (A).




3. Open the tailgate glass then remove the tailgate trim.
4. Disconnect the rear wiper motor connector then remove the rear wiper motor (A) after removing 2 bolts.






Installation

1. Reassemble the rear wiper motor assembly.

Tightening torque Nut :
14 - 17 Nm (1.4 - 1.7 kgf.m, 10.1 - 12.3 lbf.ft)


2. Reassemble the tailgate trim.
3. Reassemble the HEX nut and the rear wiper cap & pad.

Tightening torque Nut (A) :
10 - 13 Nm (1.0 - 1.3 kgf.m, 7.2 - 9.4 lbf.ft)


4. Reassemble the rear wiper arm and rear wiper cap.

Tightening torque Nut(B) :
14 - 17 Nm (1.4 - 1.7 kgf.m, 10.1 - 12.3 lbf.ft)