Scantool Diagnostics

Tire Pressure Monitoring System

C1301 Unmonitored Tire Installed - Monitor Scantool Data

Monitor Scantool Data

1. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "TPM DATA VALUES" function.
4. Check current data about S1~S4 on the 'TPMS exciter' or scantool.

Specification : All current data for S1~S4 is displayed normally




Fig.1) Sensor current data (normal)
Fig.2) Connect the DLC for 'TPMS exciter'
5. Is parameter within specifications?