Scantool Diagnostics

Tire Pressure Monitoring System

C1325 Sensor 4 Over Temperature - Scantool Diagnostics

Monitor Scantool Data

1. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "TPM DATA VALUES" function.
4. Monitor the parameter of "S4 TEMP." on the 'TPMS exciter' or scantool.

Specification : 'S4 TEMP.' is Less than 248 °F (120 °C)




Fig.1) Sensor current data (normal)
Fig.2) Executing "SET SENSOR STATUS"
5. Is parameter within specifications?