Component Inspection

Engine Control

P200A Intake Manifold Runner Performance - Component Inspection

Component Inspection

VCM Learning
1. IG "ON" and select 'Vehicle S/W Management' menu in GDS. (Fig.1)
2. After check the condition, perform 'VCM Learning'. (Fig.2, 3, 4)
















Fig.1) Vehicle S/W Management of Lamda II engine (3.5L)
Fig.2) VCM Learning Condition
Fig.3) VCM OPEN
Fig.4) VCM CLOSE
3. Has the VCM Learning been completed normally?
Referance : Normal value of the VCM feedback value in VCM Learning process










Check VCM actuator
1. IG "ON" and select 'Actuation Test' menu in GDS.
2. Execute 'VCM type vis 1'.
3. Confirm the change of VCM position sensor data and the sound of operation.

Specification : Refer to Signal Waveform & Data




4. Is everything OK?






NOTE:
In case of replacing VCM releated component, perform VCM Learning (refer to VCM Learning procedure in P200A)