Scantool Diagnostics

A6LF2

U0001 High Speed CAN Communication Bus off - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector (DLC).
2. Ignition "ON" & engine "OFF".
3. Select "Current Data" mode and monitor "Inhibitor switch" parameter.
4. Monitor the "CAN COMMUNICATION SERVICE DATA (ENGINE RPM, VEHICLE SPEED SENSOR, THROTTLE P. SENSOR)" parameters on the GDS.








Fig.1) Low-RPM
Fig.2) High-RPM
5. Is measured current data within specification?