Navigation System: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad center grill (A).





3. Remove the crash pad center lower garnish (A).




4. Remove the center facia panel (A) after loosening the screws.





5. Remove the connectors.
6. Remove the mounting bolts then remove the audio unit (A).




7. Remove the audio unit after disconnecting the audio connectors and cable.
8. Installation is the reverse of removal.

Installation

1. Reconnect the navigation connector and antenna cable.
2. Install the navigation head unit.
3. Reconnect the hazard lamp connector
4. Install the center air bent panel.
5. Install the center fascia side garnish.

NOTE:
- Make sure the navigation head unit connectors are plugged in properly, and the antenna cable is connected properly.

6. Check the navigation system.