Fog/Driving Lamp: Service and Repair

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the front side cover screw.
3. Disconnect the front fog lamp connector (A).




4. Remove the front fog lamp (A) turning it to the counter-clockwise direction.




5. Installation is the reverse of removal.

Inspection

Front Fog Lamp Relay
1. Pull out the front fog lamp (A) relay from the engine compartment relay box.
2. Check for continuity between terminals. There should be continuity between the No.87 and No.30 terminals when power and ground are connected to the No.85 and No.86 terminals.
3. There should be no continuity between the No.87 and No.30 terminals when power is disconnected.