Crankshaft Main Bearing

Main bearing

Install and uniformly tighten the bearing cap bolts, in several passes, in the sequence shown.

Tightening torque
Main bearing cap bolt
49.0 N.m (5.0 kgf.m, 36.2 lb-ft) + 90° (1 - 8)
19.6 N.m (2.0 kgf.m, 14.5 lb-ft) + 120° (9 - 16)
29.4 - 31.4 N.m (3.0 - 3.2 kgf.m, 21.7 - 23.1 lb-ft) (17 - 24)

NOTE:
- Always use new main bearing cap bolts.
- If any of the bearing cap bolts are broken or deformed, replace it.




Use the SST( 09221-4A000 ), install main bearing cap bolts.






Crankshaft







Place Of Identification Mark (Connecting Rod Bearing)




Identification Of Connecting Rod Bearing





(11)Selection