Scantool Diagnostics

Tire Pressure Monitoring System

C1335 Sensor 4 Fault - Scantool Diagnostics

Monitor Scantool Data

1. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "TPM DATA VALUES" function.
4. Monitor the parameters of 'Rear Right WE sensor (S4)' on the 'TPMS exciter' or scantool.








Fig.1) Sensor current data (normal)
Fig.2) Sensor current data (failure)
Fig.3) Executing "SET SENSOR STATUS"
5. Are parameter normal?