Monitor Scantool Data

Air Conditioner
B2406 Air Mix Motor-Driver - Scantool Diagnostics:_:Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector(DLC).
2. Engine "ON".
3. Monitor the "DR AIR MIX potentiometer" Parameter on the Scantool. While operating temp switch.




Fig1) The current data in abnormal state
Fig2) DTC B2406
4. Are the DTC B2406 present and is parameter of "DR AIR MIX potentiometer" fixed?

NOTE:
** There is any fault in DR AIR MIMotor. If the parameter of "DRIVER AIR MIDOOR" is 30% or less when the actuator operates to the hot position, or If the parameter is 60% and more when the actuator operates to the cold position.