Monitor Scantool Data

Air Conditioner
B2415 Air Mix Door Motor-Passenger - Scantool Diagnostics:_:Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector(DLC).
2. Engine "ON".
3. Monitor the "PA AIR MIX potentiometer" Parameter on the Scantool. While operating temp switch




Fig1) The current data in abnormal state
Fig2) DTC B2415
4. Are the DTC B2415 present and is parameter of "PA AIR MIX potentiometer" fixed?

NOTE:
** There is any fault in Passenger AIR MIMotor. If the parameter of "PA AIR MIDOOR" is 30% or less when the actuator operates to the hot position, or If the parameter is 60% and more when the actuator operates to the cold position.