Monitor Scantool Data

ABS/ESC
C1211 Wheel Speed Sensor Rear-RH Invalid/no Signal - Scantool Diagnostics:_:Monitor Scantool Data

Monitor Scantool Data

1. Ignition "ON" & Engine "ON".
2. Connect scantool to Data Link Connector(DLC).
3. Start and drive vehicle in gear and maintain vehicle speed at or above 50km/h. (31.1mph)
4. Monitor the "WHEEL SPD SENSOR-RR" parameter on the Scantool.

Specification :Compare with other parameters related to wheel speed sensor.
If it is the same as other parameters, it is in normal condition.

5. Is parameter displayed within specifications?