Monitor Scantool Data

ABS/ESC
C1235 Primary Pressure Sensor-Electrical - Scantool Diagnostics:_:Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector(DLC).
2. Ignition "ON" & Engine "ON".
3. Press the brake pedal.
4. Monitor the "Pressure Sensor" parameter on the Scantool.

Specification :Approx. 60bar ~150bar (There is difference in displayed parameter according to braking force)




Fig 1) Normal data at pressing the break pedal(There is difference in displayed parameter according to braking force)
5. Whenever brake pedal is pushed down, is the pressure sensor's scantool data changed?