Scantool Diagnostics
Tire Pressure Monitoring System
C1333 Sensor 2 Fault - Scantool Diagnostics
Monitor Scantool Data
1. Connect 'TPMS exciter' or scantool to Data Link Connector(DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "TPM DATA VALUES" function.
4. Monitor the parameters of 'Front Right WE sensor(S2)' on the 'TPMS exciter' or scantool.
Fig 1) Sensor current data (normal)
Fig 2) Sensor current data (failure)
Fig 3) Executing "SET SENSOR STATUS"
5. Are parameter normal?