Component Inspection

Tire Pressure Monitoring System
C1325 RR Sensor over Temp - Inspection/Repair:_:Component Inspection

Component Inspection

[Check wheel / tire]
1. Cool the heat of the Rear Right WE sensor's wheel / tire.
2. IG OFF & IG ON. And Wait 1 minute.
3. Monitor the parameter of 'S4 TEMP.' on the 'TPMS exciter'. or scantool.
A. Specification : 'S4 TEMP.' is Less than 248°F(120°C)
4. Is parameter within specifications?
YES
1) Fault can be because of temporary overheating.
2) Go to "Verification of vehicle Repair" procedure.
NO
1) Replace Rear Right WE sensor and register sensor ID with 'TPMS exciter'.
2) Go to "Verification of Vehicle Repair" procedure.