Component Inspection

Engine Control
P0315 Crankshaft Position System Variation Not Learned - Inspection/Repair:_:Component Inspection

Component Inspection

1. Visually check CKPS and target wheel
(1) IG "OFF"
(2) Visually check CKPS is loosened or target wheel is deformed or damaged.
(3) Is the above items normal ?
YES
> Substitute with a known - good PCM and check for proper operation.
If the problem is corrected, replace PCM and go to "Verification of Vehicle Repair" procedure.
NO
> Repair or replace as necessary and then go to"Verification of Vehicle Repair" procedure.