Scantool Diagnostics

Automatic Transaxle
P0883 Battery Voltage High - Scantool Diagnostics:_:Scantool Diagnostics

Monitor Scantool Data

1. Connect scan tool to data link connector(DLC)
2. ngine "ON".
3. Monitor the "A/T RELAY VOLTAGE" parameter on the scan tool.
A. Specification : Battery voltage (Approx. 10 - 14V)




4. Is "A/T RELAY VOLT " within specification?
YES
1) Go to "IG Power Inspection " procedure.
NO
1) Repair "Fuse and Battery and relation part" as necessary and Go to "Verification Vehicle Repair" procedure.