Scantool Diagnostics

Immobilizer
P1690 SMARTRA no response - Scantool Diagnostics:_:Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector(DLC).
2. IGN "ON" & Engine "OFF"
3. Monitor the "KEY STATUS","SMARTRA STATUS" and "ECU STATUS' Parameter on the Scantool.
A. Specification : 'LEARNT'




Fig1) The current data in normal state
4. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter within specifications?
YES
1) Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
1) Go to "Inspection & Repair" procedure