Repair Procedures

Replacement

Secondary Seat (L/H)
1. Disconnect the seat assembly mounting cover (L).
2. Loosen the mounting bolt, then remove the rear seat assembly (K).




3. Installation is the reverse of removal.

NOTE:
- Set the seat into the floor properly.
Unbind the connecting band between the seat and slide buckle.
Tighten the bolt temporarily in the order E->D->C.
- Set the seat into the most rearward position. Assemble the H, I temporarily, then tighten the J completely.
And tighten the H, I completely.
- Tighten the bolt completely in the order C->D->E.
Assemble the front cover of the seat and buckle. Set the seat into the most rearward position.
- Assemble the track cover of the seat and buckle buckle check that the seat operates back and forth smoothly and the locking portion of seat locks properly. And then set the seat into the most rearward position.

Seat Back Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Remove the armrest (A).




3. Using a screwdriver, remove the recliner lever (A).




4. Remove the recliner cover (A).




5. Remove the seat back panel (A).




6. Remove the recliner lever (A).




7. Remove the recliner cover (A).




8. Pull out the headrest guides (A) while pinching the end of the guides, and remove them.




9. Disconnect the protector (A).




10. Remove the seat back cover (B).




11. Installation is the reverse of removal.

Seat Cushion Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Disconnect the protector (A).




3. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




4. Installation is the reverse of removal.

Seat Frame Replacement
1. Remove the seat back cover.
2. Remove the seat cushion cover.
3. Loosen the recliner cable mounting nut (A).
4. After loosening the mounting bolts, then disconnect the seat back frame and seat cushion frame.




5. Installation is the reverse of removal.

Secondary Seat (R/H)
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Remove the recliner cover (A).




3. Using a screwdriver, remove the recliner lever (A).




4. Remove the seat back panel (A).




5. Disconnect the protector (A).




6. Remove the headrest and headrest guide (A).




7. Remove the recliner lever (A) and recliner cover (B).




8. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




9. Installation is the reverse of removal.

Seat Cushion Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).




2. Disconnect the protector (A).




3. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




4. Installation is the reverse of removal.

Seat Frame Replacement
1. Remove the seat back cover.
2. Remove the seat cushion cover.
3. Loosen the recliner cable mounting nut(A).
4. After loosening the mounting bolts, then disconnect the seat back frame and seat cushion frame.




5. Installation is the reverse of removal.

Third Seat
1. Remove the extinguisher and tool.
2. Using a screwdriver(C), remove the cab (A).
3. After loosening the mounting screw, then remove the luggage floor box (B).




4. Disconnect the seat mounting cover (A).
5. After loosening the mounting bolts, then remove the seat assembly (B).




6. Installation is the reverse of removal.

Seat Back Cover Replacement
1. Remove the third seat assembly.
2. Disconnect the cover (A), remove the hook (B).




3. Disconnect the cab (A).
4. After loosening the mounting screw, then remove the recliner lever cover (B).




5. Remove the seat back panel (A).




6. Disconnect the scuff band (A).




7. Pull out the headrest guides (A) while pinching the end of the guides, and remove them.




8. Disconnect the hog ring clip on the front of seat back, remove the seat back cover (A).




9. Installation is the reverse of removal.

Seat Cushion Cover Replacement
1. Remove the third seat assembly.
2. Loosen the mounting bolts, remove the seat cushion (A).




3. Remove the recliner cover (A).




4. Disconnect the seat back (A) and seat cushion (B).




5. Disconnect the hog ring clip (A) and scuff band (B).




6. Disconnect the hog ring clip on the front of seat cushion, remove the seat cushion cover (A).




7. Installation is the reverse of removal.