Head Lamp and Fog Lamp Aiming Point

Adjustment

Head Lamp And Fog Lamp Aiming Point








1. Turn the low beam on with driver seated in the vehicle.
In case of using a head light aim test machine, the Hot-point should be projected within the specified point in the illustration.
In case of using a screen, the cut-off line should be projected in allowable ranage. (shaded region)
In case of equipping with the manual leveling device, set the leveling device switch on the "O" position.




* In case of high beam, head lamp do not need aiming with proper beam-setting equipment.
2. Turn the front fog lamp on with driver seated in the vehicle.
The cut-off line should be projected in the allowable range (shaded region)