Part 1

VALVE BODY






DISASSEMBLY

1. Remove the 4 solenoid valves.






2. Remove the manual valve.






3. Remove the valve stopper and clamp.






4. Remove the bolts (13), and then remove the lower valve body.






5. Remove the separating plate.






6. Remove the relief spring, two steel balls and oil filter from the intermediate plate.






7. Remove the bolts (8), and then remove the intermediate and upper separation plates.






8. Remove the block.






9. Remove the upper separating plate.






10. Remove, from the upper valve body, the three steel balls, the teflon ball, and the two stopper plates.







11. Remove from the upper valve body, the seven bolts. Then remove the front end cover and the adjustment screw.-

NOTE:
When removing the bolts, be sure to hold the front end cover (as shown in the illustration) to prevent the spring from causing the adjustment screw to fall out.






12. Remove the pressure control spring and the pressure control valve.






13. Remove the torque converter control spring and the torque converter control valve.






14. Remove the regulator spring and the regulator valve.






15. Remove the shift-control spring and shift-control plug A.