Air Cleaner Housing: Service and Repair

REMOVAL





1. Remove the air duct connected to the air cleaner.
2. Disconnect the air flow sensor harness.
3. Remove the intake air hose A at the air cleaner side and the intake air hose B at the engine side.
4. Remove the air cleaner cover and element.
5. Remove the air cleaner mounting bolts inside of the air cleaner and remove the air cleaner.
6. Remove the air flow sensor between the air intake hose A and B.

INSPECTION





1. Check the air cleaner body, cover, or packing for distortion, corrosion or damage.
2. Check the air duct for damage.





3. Check the air cleaner element for restriction, contamination or damage. If the element is slightly restricted, remove dust and other contaminants by blowing air from the upper side through the element.
4. Check the air cleaner housing for restrictions, contamination or damage

INSTALLATION

Install the air cleaner in the reverse order of removal.