Installation

INSTALLATION
1. When installing the return spring and accelerator arm, apply multi.purpose grease around each moving point of the accelerator arm.

Accelerator Bracket Sealant Points:

2. Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.
Tightening torque:
Accelerator arm bracket bolts .... 8-12 Nm (80-120 kg.cm, 5.8-7.2 lb.ft.)

Accelerator Cable, Pedal End Grease Point:

3. Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.
4. Apply multipurpose grease around the cable end.