Sedan

REMOVAL
1. Remove the door scuff trim.






2. Remove the rear seat cushion mounting bolts (2EA) from the rear seat cushion.

Tightening Torque: 17-26 N.m (170-260 kg.cm, 12.3-18.8 lb.ft)












3. Remove the quarter inner trim mounting screw (3EA) and take out the quarter inner trim.
4. Remove the front seat belt upper and lower mounting bolts and seat belt guide mounting screw (2EA) from the front seat belt.

Tightening Torque:
Upper anchor mounting bolt: 40-45 N.m (400-450 kg.cm, 29-32 lb.ft)
Retractor mounting bolt: 40-55 N.m (400-550 kg.cm, 29-40 lb.ft)
Lower anchor mounting bolt: 40-55 N.m (400-550 kg.cm, 29-40 lb.ft)

5. Remove the seat belt webbing guide and center pillar upper trim.












6. Remove the front seat belt height adjuster mounting bolts from the height adjuster.

Tightening Torque: 40-55 Nm (400-550 kg.cm, 29-40 lb.ft)

7. Remove the front seat belt assembly






INSTALLATION
Installation is the reverse of the removal procedure.