Installation

INSTALLATION
1. Install the spacer.
2. Install upper side rail. To install side rail, first put one end of side rail between piston ring groove and spacer, hold it down firmly, then press down with your finger the portion to be inserted into groove as illustrated.

NOTE: Do not use piston ring expander when installing side rail.

3. Install lower side rail by same procedure as Step 2.
4. Using piston ring expander, install No.2 piston ring.
5. Install No. 1 piston ring.
6. Apply engine oil around piston and piston rings.
7. Position each piston ring end gap as far apart from neighboring gaps as possible. Make sure that gaps are not positioned in side rail thrust and pin directions.