Gear Ratios

GEAR RATIO
First: 2.846
Second: 1.581
Third: 1.000
Fourth: 0.685
Reverse: 2.176
Final gear ratio: 3.659
Speedometer gear ratio (drive/driven): 36/32

SERVICE SPECIFICATIONS
End Play
Low Reverse Brake 0.675-0.987 mm (0.026-0.039 inch)
Transfer Drive Gear 0-0.06 mm (0-0.0024 inch)
Transfer Shaft (Without Pre-load) 0.01-0.06 mm (0.0004-0.0024 inch)

TIGHTENING SPECIFICATIONS
Bearing Retainer Screw 17-22 Nm (12-16 ft. lbs.)
Cover To Selector Knob 2.0 Nm or more (16.80 inch lbs. or more)
Drain Plug 35-45 Nm (25-32 ft. lbs.)
Hose Bracket 3-5 Nm (24-48 inch lbs.)
Manual Control Lever Lock Nut 17-21 Nm (12-15 ft. lbs.)
Manual Control Shaft Set Screw 8-10 Nm (72-84 inch lbs.)
Pressure Check Plug 8-10 Nm (72-84 inch lbs.)
Pulse Generator Mounting Bolt 10-12 Nm (84-108 inch lbs.)
Rear Cover 19-23 Nm (14-16 ft. lbs.)
Sprag Rod Support Bolt 20-27 Nm (15-19 ft. lbs.)
Transfer Shaft Lock Nut 200-230 Nm (146-166 ft. lbs.)