Connecting Rod Service Specifications

DIMENSIONS
Bearing Oil Clearance
Standard Value 0.016-0.046 mm (0.0006-0.0018 inch)
Wear Limit 0.10 mm (0.0040 inch)
Bearings For Service (Undersize)
1st Undersize 0.25 mm (0.0100 inch)
2nd Undersize 0.50 mm (0.0200 inch)
3rd Undersize 0.75 mm (0.0300 inch)
Bend 0.05 mm Or Less per 100 mm (0.0020 inch Or Less per 8.9370 inch)
Piston Pin Press-in Load 7,500-17,500 N (765-1,785 Kg, 1,686-3,934 lb)
Side Clearance (Big End)
Standard Value 0.10-0.25 mm (0.0039-0.0098 inch)
Wear Limit 0.40 mm (0.0160 inch)
Twist 0.10 mm Or Less per 100 mm (0.0039 inch Or Less per 3.9370 inch)

TIGHTENING SPECIFICATIONS
Connecting Rod Cap Nuts 50-53 Nm (500-530 kg. cm, 36-38 ft. lbs.)