Hydraulic Pressure Tests

1. Completely warm up the transaxle.
2. Raise the front of the vehicle so that the front wheels can be rotated.
3. Connect an engine tachometer and place it in a position where it's easy to see.








4. Attach the special oil-pressure gauge (09452 - 21500) or equivalent, and the adapter (09452 - 21001, 09452 - 21002) or equivalents to each oil-pressure outlet port. When the reverse pressure is to be tested, the 3,000 kPa (400 psi) type of gauge should be used.
5. Measure the oil pressure under various conditions, and check measured results are within the standard value range shown in the "Standard oil pressure table".





Standard Oil Pressure Table











Preliminary Steps If Oil Pressure Is Not Normal.