Front Door Panel: Service and Repair

REMOVAL

1. Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only).





2. Remove the quadrant inner cover.
3. Remove the rear view mirror mounting screws and then remove the rear view mirror. Disconnect the remote control and mirror heated connector (Electric type only)





4. Remove the front door inside handle bezel.





5. Remove the mounting screw (1EA) from the door pull handle and then remove the door trim pull handle.





6. Remove the power window main switch. Disconnect the power window switch connector.





7. Remove the mounting screw (lEA) from the trunk opener switch and then disconnect the trunk opener switch connector.





8. Remove the mounting screws (4EA) from the front door trim panel.





9. Insert a screwdriver between the trim fasteners and then remove the door trim panel. Disconnect the door lamp connector.





10. Remove the pull handle mounting bracket and door inside handle and then remove the door trim seal.





- Reverse procedure to install