Shifter M/T: Service and Repair

SHIFT LEVER ASSEMBLY





Shift Lever Assembly

Inspection

1. Check the bushing for wear or damage.
2. Check the return spring for damage or deterioration.

Reassembly





1. Apply specified grease to points shown in illustration.

Specified grease: Multipurpose grease SAE J310, NLGI No. 2





2. Install so that the return spring is in secure contact with the bracket end surface.
3. Apply a coating of the specified grease to the return spring and bracket sliding part.

Specified grease: Multipurpose grease SAE J310, NLGI No. 2