Windshield Washer Spray Nozzle: Testing and Inspection
Washer Nozzle1. Disconnect washer hose from the nozzle and then pressing the pawls to the back side of engine hood, detach washer nozzle.
2. After installation, place a wire in the injection port of nozzle and adjust the direction of washer fluid by moving the wire.
Nozzle Bracket
1. Check the washer fluid contact point.
2. Adjust the washer fluid contact point by using a metal wire to move the washer nozzle ball.
3. If the amount of washer fluid sprayed is too small, check for clogged, bent or crushed washer tube.