Rear Door Panel: Service and Repair

REMOVAL

1. Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only)





2. Remove the inside handle bezel.





3. Remove the mounting screw (1EA) from the door pull handle and then remove the door trim pull handle.





4. Remove the door power window switch.
5. Disconnect the door power window switch connector.





6. Remove the mounting screws (4EA) from the rear door trim panel.





7. Insert a screwdriver between the trim fasteners and then remove the door trim panel.





8. Remove the door pull handle mounting bracket and door inside handle and then remove the door trim seal.





- Reverse procedure to install.