Front Cross-Member: Service and Repair

REMOVAL
1. Jack up the vehicle and install jack stands.
2. Remove the center member mounting bolts.
3. Remove the stabilizer bar and steering gear box assembly.
4. Do not drop or damage the dynamic damper, because it is fastened to the center member.

CAUTION: Do not drop or damage the dynamic damper, because it is fastened to the center member.

INSPECTION
1. Check the crossmember for cracks or deformation.
2. Check the bushings for cracks or deterioration.
3. Check the center member for cracks or deformation.




INSTALLATION
Install the front end of the center member so that the bushings are in the positions shown in the illustration.