Wheel Speed Sensor: Service and Repair

REMOVAL
1. Disconnect the wheel speed sensor connector and mounting bolts.

FRONT WHEEL SPEED SENSOR





1. Remove the front wheel speed sensor mounting bolt.
2. Remove the front wheel speed sensor after letting the wheel guard down by removing some of the wheel guard mounting screws and disconnecting the wheel speed sensor connector.

REAR WHEEL SPEED SENSOR





1. Remove the rear seat cushion.
2. Remove the rear pillar trim assembly.
3. Remove the tire assembly.
4. Remove the rear wheel speed sensor after disconnection the wheel speed sensor connector.

INSPECTION





1. Connect an ohmmeter between the wheel speed sensor terminals and measure the resistance.

Front: 1275 - 1495 Ohms
Rear: 1260 - 1540 Ohms





2. Connect a voltmeter between the wheel speed sensor terminals, and measure the voltage by turning the wheel.

NOTE Set the voltmeter to measure AC voltage.

Service standard: AC voltage detected.