Front Door Panel: Service and Repair

COMPONENTS

REMOVAL AND INSTALLATION

1. Remove clip using a piece of cloth (Manual type only).Then the door window regulator handle.

2. Remove the quadrant inner cover and the rear view mirror.

3. Remove the front door inside handle housing.

- Remove the power window main switch and disconnect the power window switch connector. (Power type only)

4. Remove the front door trim panel.

5. Insert a trim panel remover between the trim fasteners and the door trim panel to pry OFF.
Disconnect the door lamp connector.

6. Remove the pull handle mounting bracket and door inside handle and the door trim seal.

7. Remove the front speaker.

- Reverse procedure to install.