Crankshaft: Specifications
| Out-Of-Roundness Of Journal And Pin | 56.982 - 57.000 Millimeter (mm) | |
| Taper Of Journal And Pin | Less Than 0.005 Millimeter (mm) | |
| End Play | Specifications | 0.05 - 0.25 Millimeter (mm) |
| Limit | 0.25 Millimeter (mm) | |
| Engine Hanger | M8 | 25 - 35 Newton Meter (Nm) |
| M10 | 35 - 55 Newton Meter (Nm) | |
| Crankshaft Bearing Cap Bolt | Step 1 | 25 Newton Meter (Nm) |
| Step 2 | 90 - 94 deg. |