Rear Seat Belt

1. Remove the rear seat cushion.






2. Loosen the rear seat back side cover mounting bolt and remove the rear seat back side cover from hook while lifting the rear seat back side cover.






3. Remove the high mounted stop lamp.






4. Remove the partition cover.






5. Remove the rear seat belt lower mounting bolt (1 4mm) and seat belt guide.






6. Remove the rear seat belt retractor mounting bolt.







7. Remove the rear seat belt double buckle assembly.



INSTALLATION
Installation is the reverse of the removal procedure.

CAUTION:






1. When installing the rear seat belt assembly, be careful that the lower anchor plate must be placed in direction of front of the vehicle as illustration.






2. When installing the rear seat assembly, the seat belt must be passed through the rear seat cushion hole with untwisted state, as shown in the illustration.