Coolant Line/Hose: Service and Repair

INSPECTION
Check the coolant pipe and hoses for cracks, damage, or restrictions.
Replace if necessary.

REASSEMBLY





1. Fit on O-ring in the groove provided at the coolant inlet pipe end, wet the O-ring with coolant and insert the coolant inlet pipe.

NOTE:
1. Do not apply oil or grease to the coolant pipe O-ring.
2. Keep the coolant pipe connections free of sand, dust, etc.
3. Insert the coolant pipe fully into the cylinder block
4. Do not reuse the O-ring. Replace it with a new part.