Fluid - M/T: Service and Repair

REPLACEMENT OF TRANSAXLE GEAR OIL
1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.





2. Replace the gasket with a new one and install the drain plug.
Tightening torque:
Drain plug: 30 - 35 Nm (300 - 350 kg.cm, 22 - 25 lb. ft.)





3. Add new oil the through the filler plug, filling to a level 5 - 9 mm (0.2 - 0.4 inch) below the plug opening.
Transaxle oil total capacity: 2.15 L (2.27 u.s. qts., 1.89 Imp. qts.)
Tightening torque:
Filler plug: 30 - 35 Nm (300 - 350 kg.cm, 22 - 25 lb. ft.)