Fluid - M/T: Service and Repair
REPLACEMENT OF TRANSAXLE GEAR OILUse HP Gear Oil SAE 75W/90 (API-GL-4).
1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug.
Tightening torque:
Drain plug : 30 - 35 Nm (300 - 350 kg.cm, 22 - 25 ft. lbs.)
3. Add new oil the through the filler plug, filling to a level of 5 - 9 mm (0.2 - 0.4 inch) below the plug opening.
Transaxle oil total capacity : 2.15 L (2.27 u.s. qts., 1.89 Imp. qts.)
Tightening torque:
Filler plug : 30 - 35 Nm (300 - 350 kg.cm, 22 - 25 ft. lbs.)